Submitted By: Slodin
Member since: Aug 12, 2009
TechWiki points: 2247
Duplicate entry '0' for key 'PRIMARY'
Minimum System Requirements
|Name:||Hauppauge WinTV-HVR2250 Dual TV Tuner|
|TV Tuner||Dual Tuner|
|TV Standards||ATSC / ClearQAM / NTSC|
|Features||Watch and record two TV programs at the same time: two analog cable TV channels, two digital TV channels or one analog cable and one clear QAM digital cable TV channel.
When recording analog cable TV, the dual built in hardware MPEG-2 encoders let your PC run at full speed.
Watch and record 'clear QAM' digital TV. Clear QAM digital TV channels are TV channels which are broadcast "in the clear" on your cable TV network.
Includes Hauppauge's WinTV v7 application, which allows you to watch analog cable TV, QAM and ATSC digital TV channels.
Now supports Windows 7!
Single slot PCI Express (PCIe) X1 board, half height
Built-in antenna splitter allows you to make one connection to an ATSC antenna but watch and record up to 2 channels.
Supports Dolby Digital AC3 audio.
Composite/S-Video and audio inputs, for cable or satellite set top boxes or VCRs.
- WinTV-HVR-2250 is a PCI Express X1 board based on the NXP 7164 bus interface chip. The WinTV-HVR-2250 contains two tuners with a built-in TV splitter. There is one cable TV or TV antenna connector which is split, providing a video source for both tuners. For ATSC and QAM digital TV, all 18 ATSC formats including 1080i can be watched or recorded to disk as a MPEG-2 Program Stream. The NXP 7164 contains two highly integrated MPEG-1/2 hardware encoders for recording analog cable TV to disk. The playback of the recorded ATSC and QAM digital TV and MPEG-2 encoded analog programs are done through a software MPEG-2 player.
- WinTV-HVR-2250 now supports an on-board IR receiver and blaster, which can control up to two external set top boxes. With the on-board remote receiver/blaster, you no longer need the external "beanbag" remote receiver. The on-board receiver also has a "learn" mode, so you can use almost any external set top box.
|Video Encoding||Hardware Encoding|
|Ports In||Antenna / Cable TV input
FM Radio input
S-Video / Composite input
Remote Control Receiver input
|Processor||2.2 GHz P4 or equivalent|
|Graphics Card||Graphics with 64 MB memory (or greater)|
|Available Slot||Available PCIe X1 or X8 slot|
|Operating Systems Supported||Microsoft Windows Vista Premium or Ultimate with Media Center or Windows XP Media Center Edition|
CD reader for software installation
Full height A/V input board
Optional half height/L-P bracket