Lian Li PC-A77

Minimalism Style, unlike other chassis, it has Simple and Clean shape! Using 2mm to 1.2mm thick aluminum panel formed to this unique design in hair-line brushed anodized aluminum metallic finishing, with freedom to setting up the hardware layout.

PC-A77 has 12 x 5.25" bays rack design to allow for freedom to position the two modularized HDD cages to suit users' needs. To build the system the way you always wanted.

Huge internal space fits E-ATX motherboard, and graphics card which up to 395mm long, and there are room for 9 hard drivers, there are space for dual power supply units. There are total of 4 12cm cooling fans to cool the system down, and a lot of internal space for liquid cooling system. It is an ideal for gamer and pro user!

PC-A77 features Smart Fan Control to control the fan speed automatically. There are total of 4 x 12cm fans, therefore it is a good idea to control the fan speed to lower the noise level. The fan speed will automatically adjust from 1020 to 1500 RPM by temperture difference.

PC-A77 used large size fans to improve the silent issue, there are two 120mm fans in the front and two 120mm fans at the rear feature low RPM with high air flow to get the best balance between silent and cooling.

There are anti-vibration kits fitted in the chassis to stop the vibration which cause the noise.

PC-A77 is using "Thermal Tunnel" solution, the two 120mm fans in the front input cold air into the system, the two 120mm fans and the PSU's fan draw the hot air out as a heat circulation . To get extra cooling to particular area, simply adjust the HDD cage to allow cold air to cool the hot spot .

The case front fitted with vented 5.25” bezels, allow the cold air to enter the chassis, there are air filter on the bezel to stop dust entering the chassis.

There is a 120mm exhaust fan at the rear to draw the hot air out, and improve the air flow inside the chassis.

There are alot of M/B using heat pipe solution, PC-A77 can 100 support them, for extra cooling, there are openning on the M/B tray, allow air to cool the rear of the M/B.

There is a smart way to control the fan speed. PC-A77 can automatically adjust the fan speed as temperature difference. When there is not hot inside the chassis, the fan will be set in low speed mode, to make the system silent, and to extend fan's life cycle. The Fan speed will adjusted automatically by temperature difference, fan speed from 1020RPM to 1500RPM.

Power supply unit located at the lower part of the chassis, and it can get the cool air from the bottom of the chassis. Ideal for keep power supply in lower temperature to keep in best output performance, also keep the components cold to extend the life cycle.

There are opening for water tubes on rear panel. Ideal for user who would like to fit liquid cooling system into PC-A77.